Signet 9900 Smart Meter
The GF Signet 9900 Transmitter provides a single channel interface for many different parameters including Flow, pH/ORP, Conductivity/Resistivity, Salinity, Pressure, Temperature, Level and other sensors that output a 4 to 20 mA signal. The extra large (3.90″ x 3.90″) auto-sensing backlit display features “at-a-glance” visibility that can be viewed at 4-5 times the distance over traditional transmitters. The highly illuminated display and large characters reduce the risk of misreading or misinterpreting the displayed values. The display shows separate lines for units, main and secondary measurements as well as a “dial-type” digital bar graph.
The 9900 is offered in both panel or field mount versions. Both configurations can run on 12 to 32 VDC power (24 VDC nominal). The 9900 can also be loop powered with compatible sensors.
Designed for complete flexibility, plug-in modules allow the unit to easily adapt to meet changing customer needs. Optional modules include Relay, Direct Conductivity/Resistivity, H COMM and a PC COMM configuration tool. The unit can be used with default values for quick and easy programming or can be customized with labeling, adjustable minimum and maximum dial settings, and unit and decimal measurement choices.
9900 Transmitter Applications:
- Wastewater treatment
- Reverse osmosis
- Deionization (ultra pure water, two bed system, mixed bed system)
- Chemical manufacturing / addition
- Metal and plastic finishing
- Fume scrubber
- Cooling towers
- Media filtration
GF Signet 2536 Rotor-X Paddle Wheel Flow Sensor (Blue)
Simple and reliable, the GF Signet 2536 Rotor-X paddle wheel flow sensor delivers time-honored performance. The highly repeatable and rugged GF Signet 2536 Rotor-X paddle wheel flow sensor offers exceptional value with little or no maintenance required. Installation of the GF Signet 2536 Rotor-X paddle wheel flow sensor is simple with GF Signet’s comprehensive line of fittings for all pipe materials in sizes from DN15 to DN1000 (0.5 to 36in.). The 3-2536 has a process-ready open-collector signal and can operate to flows as low as 0.1 m/s (0.3 ft/s).
The GF Signet 2536 Rotor-X paddle wheel flow sensor has a unique “open-cell” rotor design, which eliminates cavitation at higher flow rates.
Applications for the GF Signet 2536 Rotor-X Paddle Wheel Flow Sensor
- Pure water production
- Filtration systems
- Chemical production
- Liquid delivery systems
- Pump protection
- Scrubber systems
- Water monitoring
- Not suitable for gases
GF Signet 0515 Rotor-X Paddle Wheel Flow Sensor (Red)
The GF Signet 515 Rotor-X paddle wheel flow sensors have a wide dynamic flow range of 0.3 to 6m/s (1 to 20 ft/s), which allows the sensor to measure liquid flow rates in full pipes and can be used in low pressure systems.
The GF Signet 515 Rotor-X paddle wheel flow sensors are offered in a variety of materials for a wide range of pipe sizes and insertion configurations. The many material choices include PP, PVDF, and Tefzel make this model highly versatile and chemically compatible to many liquid process solutions. GF Signet 515 Rotor-X paddle wheel flow sensors can be installed in up to DN900 (36 in.) pipes using GF Signet’s comprehensive line of custom fittings. These custom fittings, which include tees, saddles, and weldolets, set the sensor to the proper insertion depth into the process flow. GF Signet 515 Rotor-X paddle wheel flow sensors are also offered in configurations for wet-tap and intrinsically safe installation requirements.
Applications for the GF Signet 515 Rotor-X Paddle Wheel Flow Sensor:
- Filtration Systems
- Pure Water Production
- Chemical Production
- Liquid Delivery Systems
- Pump Protection
- Scrubber Systems
- Water Monitoring
- Not suitable for gases